> FUNCTION LIST/SPECIFICATIONS > SPECIFICATIONS

SPECIFICATIONS

1. Basic function

Basic watch (hour, minute, and seconds hands), date display

2. Frequency of crystal oscillator

32,768 Hz (Hz = Hertz ... Cycles per second)

3. Loss/gain (monthly rate)

Loss / gain ±15 seconds on a monthly rate (When the watch is used without an automatic time setting by receiving GPS signal and when it is worn on the wrist within a normal temperature range between 5°C and 35°C (41°F and 95°F)).

4. Operational temperature range

Between −10°C and +60°C (14°F and 140°F)

5. Driving system

Step motor type: Basic watch (hour, minute, and seconds hands), date

6. Power source

Secondary battery, 1 piece

7. Duration of operation

About 6 months (on a full charge, without power save function)

If the Power Save is activated after it is fully charged, the watch continues to run for approximately 2 years at maximum.

8. GPS signal reception function

Time zone adjustment, manual time adjustment, automatic time adjustment

Between reception and the next reception, the watch operates with the above quartz precision

9. IC (Integrated Circuit)

Oscillator, frequency divider and driving circuit C-MOSIC, 4 pieces

The specifications are subject to change without prior notice due to product improvements.

Declaration of Conformity