Manual time setting
When a problem cannot be solved even by carrying out the Points to be checked, or time is gained or lost under a condition in which the watch is unable to receive GPS signals and the watch is unable to receive GPS signals continuously, set the time manually.
How to manually set the time
When using the watch again under a condition in which the watch is able to receive GPS signals, receive GPS signals to set the time.
When adjusting the time, the date will also be adjusted.
-
Pull out the crown to the second click
-
Press Button B continuously for 6 seconds, then release when the seconds hand moves to the 0-second position
-
Turn the crown to set the time
-
Push the crown back in (simultaneously with a time signal)
The seconds hand will move to the 0-second position.
Pull out
the crown to the second click
3 seconds after pressing Button B, the seconds hand will move to the 18-second position. Please continue pressing the button.
The seconds hand moves to stop at the 0-second position.
The watch enters the manual time setting mode.
Press for 6 seconds
When the watch enters the manual time setting mode, the reception result will be displayed as “N”, since the reception results data will be lost.
Turn the crown clockwise to advance the time.
Turn the crown counterclockwise to set back the time.
Turn quickly to move continuously.
Turn again to stop moving.
When it has moved continuously for 12 hours, it will stop.
Turn the crown to continue setting.
The point in which the date changes is at 0:00 AM (12:00 PM). Set the time taking into consideration AM or PM.
Operation has been completed.
The watch resumes its normal movement.
Push back in
Even if GPS signals cannot be received, the watch can be used with the same accuracy as a normal quartz watch. (at loss/gain ±15 seconds per month on average)
If the watch receives GPS signals after manual time setting, it displays the received time.