In-flight mode (
)
Set to the in-flight mode () where the reception may influence operation of other electronics devices in an airplane, etc.
In the in-flight mode (), the GPS signal reception (time zone adjustment, manual time adjustment, and automatic time adjustment) does not work.
< In-flight mode () >
The multi-function indicator hand points to .
When the in-flight mode () is reset, the multi-function indicator hand indicates the day of the week (or the energy level).
Set to the in-flight mode ().
-
Pull out the crown to the first click
-
Continue to press Button B (3 seconds)
-
Push the crown back in
The seconds hand moves to display the currently set time zone.
The multi-function indicator hand indicates DST (Daylight Saving Time) setting.
Pull out to the first click
The multi-function indicator hand displays the in-flight mode (). (5 seconds)
Afterward, it indicates the DST (Daylight Saving Time).
Press for 3 seconds
The multi-function indicator hand returns to display the in-flight mode ().
Push back in
When the in-flight mode () is set, the multi-function indicator hand does not indicate the day of the week.
Note that by rotating the crown after 
and 
are completed, the time zone will switch.
To set the watch to the local time of the destination in an airplane, etc. (Manual time zone setting)
Reset the in-flight mode ().
Turn off the in-flight mode when leaving an airplane, etc.
If it is not turned off, the watch will not be able to receive GPS signals.
Carry out operation to 
.
will make the multi-function indicator hand point to “4+”, indicating that in-flight mode has been turned off. (5 seconds)
Afterward, it indicates the DST (Daylight Saving Time). will make the multi-function indicator hand display the day of the week, and the in-flight mode () will be turned off.
If the energy level is low, the day of the week is not displayed, and the watch returns to a charging status display of “low.”