The times on the digital and analog displays are linked.
You can set the analog display time by setting the digital display time.
If the digital display time and the analog display time are out of sync, the standard hand position is misaligned. Set the standard hand position. How to set the standard hand position
-
Unlock the crown and button.
-
Press and hold Button
to show the time on the digital display. -
Pull out the crown.
The hands on the analog display will stop and “seconds” on the digital display will start flashing.
-
Turn the crown to set the time and calendar.
Turn clockwise:
Time/date moves forwards
Turn counterclockwise:
Time/date moves backwards
Press Button , the flashing item that can be set changes.
Second
Minute
Hour
Day
Month
Year
12/24H
Second
Minute
Hour
Day
Month
Year
12/24H
When setting the seconds, select “Seconds” and turn the crown to set the seconds in accordance with the time signal service.
If you turn the crown while 30 to 59 seconds are shown on the seconds display, one minute is added to the time and the second digits are immediately reset to “00”.
The telephone time signal service is helpful for setting the seconds hand exactly.
Setting the date automatically sets “Day”.
-
Push the crown back in to the normal position.
-
Lock the crown and button.
The hands on the analog display move to the set time and the watch starts to function.
This watch is equipped with a fully automatic calendar function. As the day of the week, day, month, and year from 2001 to 2100 have been programmed in the automatic calendar, you do not need to manually adjust odd and even months and leap years during this period.
How to set the standard hand position
If the analog display time and digital display time are misaligned, the standard hand position will need to be corrected.
-
Unlock the crown and button.
-
Press and hold Button
to show the time on the digital display. -
Pull out the crown.
-
Hold down Button
.
The seconds on the digital display will start flashing.
After moving, all hands will stop, and “S SET” will start flashing on the digital display.
The hand to be aligned to the standard position moves slightly to indicate that it is ready to be aligned.
-
Set all hands to the 12 o’clock standard position.
-
Turn the crown to advance the seconds hand to the 12 o’clock position.
(Proceed to
if the seconds hand is already in this position) -
Press Button
to select the hand not aligned with the standard position. -
Turn the crown to set the hand to the 12 o’clock position.
The seconds hand will not move if the crown is turned counterclockwise.
The selected hand moves slightly to indicate that it is ready to be aligned.
Aligning the seconds hand
Aligning the minute hand
Aligning the hour hand
Aligning the seconds hand
Aligning the minute hand
Aligning the hour hand
-
Push the crown back in to the normal position.
-
Lock the crown and button.
The hands on the analog display move to the current time and the watch starts to function.
Listening to the Alarm Tone and Setting the Time Signal Service/Operation Confirmation Sound
Listening to the alarm tone
When the digital display is showing the time, holding down Button and Button at the same time enables you to listen to the alarm tone.
The alarm symbol will start flashing
Setting the time signal service/operation confirmation sound
When the digital display is showing the time, pressing Button and Button at the same time enables you to set and turn off the time signal service/operation confirmation sound.
Time signal service symbol
The alarm tone will sound at this time, but this is not an error.