Some bands are provided with an adjustable three-fold clasp.
If the clasp of the watch you purchased is as follows, please refer to the following instructions.
How to wear or take off the watch
-
While pressing the push buttons on both sides of the flap, pull the band out of the movable loop and fixed loop. Then open the clasp.
-
Place the tip of the band into the movable loop and fixed loop, and fasten the clasp by pressing the frame of the buckle.
Fixed loop
Movable loop
Buckle
Flap
Push button
How to adjust the length of the band
-
While pressing the push buttons on both sides of the flap, pull the band out of the movable loop and fixed loop. Then open the clasp.
-
Press the push buttons again to unfasten the flap.
-
Pull the pin out of an adjustment hole of the band. Slide the band to adjust its length and find an appropriate hole. Place the pin into the hole.
-
Fasten the flap.
Fixed loop
Movable loop
Buckle
Flap
Push button
Pin
Adjustment hole
The above illustrations are provided as examples. Some details may differ depending on the model.