The watch is provided with a date function and is so designed that the date changes once every 24 hours.
The date changes around 12 o’clock midnight. If AM/PM is not properly set, the date will change at 12 o’clock noon.
CAUTION
Do not amend the date when the watch is displaying between 8 PM and 2 AM.
Amending the date during this time period may cause problems such as the date failing to change the next day.
-
Unlock the crown.
-
Pull out the crown to the first click.
-
The date can be set by turning the crown.
Turn it until the previous day’s date appears.
Ex.) To display the date as “6,” then set this to “5.”
Turn the crown clockwise to set the date.
-
Pull out the crown to the second click and set the time.
Pull out the crown to the second click when the seconds hand is at the 12 o’clock position; the seconds hand stops on the spot.
Turn the crown to advance the hands until the date changes to the next. The time is now set for the A.M. period. Advance the hands to set the correct time.
-
Push the crown back in to the normal position in accordance with a time signal.
-
Relock the crown.
The seconds hand immediately starts moving.
The telephone time signal service is helpful for setting the seconds hand exactly.
CAUTION
The mechanism of mechanical watches is different from that of quartz watches. When setting the time, be sure to turn back the minute hand a little behind the desired time and then advance it to the exact time.
Date adjustment at the end of the month
It is necessary to adjust the date at the end of February and 30-day months.
Ex.) To adjust the date in the A.M. period on the first day of a month following a 30-day month
The watch displays “31” instead of “1.” Pull out the crown to the first click.
Turn the crown clockwise to set the date to “1” and then push the crown back in to the normal position.
CAUTION
Return the screw down crown fully to its original position.
Avoid amending the date when the watch is displaying between 8 PM and 2 AM. Doing so may cause damage.