How to conduct manual reception (Receive a radio signal manually)

1. Place the watch.

Place the watch where it can easily receive a radio signal.

To improve radio signal reception

Environments in which it is difficult to receive a radio signal

The watch cannot receive a radio signal outside the radio signal reception range. Radio signal reception range indication



The antenna is embedded at the 9 o’clock position of the watch. Turning the antenna toward the outside of a window helps improve radio signal reception.

2. Continue to press and hold the button for 3 seconds, and then release it when the seconds hand moves to the 0-second position.

Reception starts after the seconds hand moves and stops at the 0-second position.

When the time difference is set for a region other than radio signal reception range, the seconds hand does not move to the 0-second position. (A radio signal cannot be received manually.) Check the time difference set currently.
Setting the time difference (Setting the radio signal transmitting station)



Press and hold for
3 seconds

3. Place the watch and wait for a few minutes (max. 12 minutes).

When the seconds hand moves at the one-second interval, the reception is finished.

It takes time to receive a radio signal (max. 12 minutes).

The required time varies depending on the receiving state of a radio signal.

The seconds hand indicates the reception level. (Updated every minute)

The seconds hand indicates the reception result “N.”

Reception result : N

After 5 seconds, the watch switches to the time display mode.

If reception has failed: The seconds hand points to N

1. When the seconds hand starts to move at one-second intervals, check that the reception is successful.

When the reception is finished, check that the reception is successful.

How to display the reception results

During movement of the date, neither the button nor the crown can be operated.