> TO PRESERVE THE QUALITY OF YOUR WATCH > How to use the pull-through type band

How to use the pull-through type band

This band has a mechanism that makes it easy to replace the band yourself.

Please read the instructions carefully before replacing the band.

Attaching a new band

First, remove the old band from the case.

Ensure that the spring bars are securely attached to the case.

Ensure that the buckle and fixed loops are fixed and attached securely to the band.

Pull-through type band-1 + Pull-through type band-1

Spring bar

Tip of the band

Fixed loop Num1

Fixed loop Num2

Movable loop

Buckle

(12 o’clock side)

(6 o’clock side)

This may be a fixed loop.

  1. As illustrated, position the watch and band with the buckle on the 12 o’clock side and pass the tip of the band, from the top, between the 12 o’clock side of the case and the spring bar.

  2. Pull-through type band-2_1
  3. Pass the band across the back cover of the watch body and then between the 6 o’clock side of the case and the spring bar.

  4. Pull-through type band-2_2
  5. Pass the tip of the band through the fixed loop ① on the 6 o’clock side.

  6. The band is now attached to the case, and the watch is ready to be worn on your wrist.

    Pull-through type band-2_3 + Pull-through type band-2_3

    Fixed loop Num1

    Buckle

How to wear the band

  1. Place the watch body on your wrist, pass the tip of the band through the buckle, and set the band to the appropriate length.

  2. Pass the tip directly through both the movable loop and the fixed loop ②.

  3. As a guide, the band should be loose enough for a finger to fit between your wrist and the watch.

    Pull-through type band-3_1 + Pull-through type band-3_1

    Fixed loop Num2

    Movable loop

    This may be a fixed loop.

  4. If the band is too long, fold and secure the tip of the band as illustrated.

  5. Pull-through type band-3_2